Table of Contents
Advertisement
NOTE: To ensure proper signal integrity on a given PCI bus, add-in
cards must be installed in order starting with the top PCI slot
Replacing a System Fan
The system fans at the front of the Server Chassis can be individually
replaced if one of them fails. The fans that are integrated into the
power supply cannot be replaced separately. If one of these fans fails,
the power supply must be replaced.
To replace a system fan, use the following instructions.
1
Remove the chassis cover.
2
There are no screws to loosen. Grab hold of the fan by the lever
and lift fan from the module..
3
Install new fan by pushing down until the fan is completely
installed into the fan module.
4
Installing the Chassis Cover
Connecting peripherals
The system unit, keyboard, mouse, and monitor constitute the basic
system. Before connecting any other peripherals, connect these basic
peripherals first to test if the system is running properly.
.
67
Advertisement
Table of Contents
