Safety - Warner OC-725C User Manual

Safety Information
Please read the following safety precautions to ensure proper use of your syringe pump.
If the equipment is used in a manner not specified, the protection provided by the
equipment may be impaired.
To Prevent Hazard or Injury:
Use Proper Line Cord
Use only a line cord that is certified for country of use. The Operating voltage range for
the OC-725C is 100-120~, or 200-240v~.
Ground the Product
This product is grounded through the grounding conductor of the power cord. To avoid
elextric shock, the grounding conductor must be connected to earth ground. Before
making any connections to the input or output terminals of the product, ensure that the
product is properly grounded.
Make Proper Connections
Make sure all connections are made properly and securely. Any signal wire connections
to the unit must be no longer than 3 meters.
Observe All Terminal Ratings
Review the operating manual to learn the ratings on all connections.
Use Proper Fuse
Use only specified fuses with product.
Avoid Exposed Circuitry
Do not touch any electronic circuitry inside of the product.
Do Not Operate with Suspected Failures
If damage is suspected on or to the product do not operate the product. Contact
qualified service personnel to perform inspection.
Orient the Equpment Properly
Do not orient the equipment so that is is diffucult to manage the connection and
disconnection of devices.
Place Product in Proper Environment
Review the operating manual for guidelines for proper operating environments.
Observe all Warning Labels on Product
Read all labels on product to ensure proper usage.
5
www.warneronline.com