Binatone Veva 1210 User Manual page 45

Troubleshooting continue...
Move the Handset closer to the Base unit before you try
"My call was cut off
when I went out of again to make a call.
range. Now I can't
use my handset."
"There is interference, Move the Handset closer to the Base unit, or to a
different position.
noise or echoing on
the line."
Try moving the Base unit so that it's not near other
electrical equipment, such as a TV or a computer.
If you are using a routing box (smart socket), try
disconnecting it then making a call. If the sound is OK
without the routing box, that's the cause of the problem.
You'll get the best results if you site the Base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place for the base unit.
"When I press the The strange noise is caused by interference. Disconnect
the mains power lead from the back of the Base unit,
PHONE or SPEAKER-
then wait for 30 seconds before reconnecting it.
PHONE button, I hear
a loud noise."
Make sure to hold the earpiece correctly over your ear.
"The volume in the
earpiece is low."
Adjust the volume as described in Section 5.
"The Caller Display You need to subscribe to Caller Display from your service
feature isn't provider. Contact the service provider for details of how to
working."
subscribe.
The caller may have withheld his number by dialing 141.
Or he may be calling from a network that does not trans-
mit the Caller Display (ex., it may be an international call).
Check if your Handset is linked with the Base unit. If not,
you need to re-register the Handset.
If the display says BS SEARCH
power lead is plugged into the back of the Base unit, and
the adapter is plugged into the mains socket with the
power switched on.
BS SEARCH, make sure the mains BS SEARCH BS SEARCH BS SEARCH
38