Syncing The Quad And Remote - Quadrone Maximus Instruction Manual

1. Turn on your Quadrone by changing the switch on the back of the
drone from OFF to ON. Place it on a flat surface. The lights on the
Quadrone will begin to flash. Do not move the Quadrone during the
syncing process to ensure the gyroscope stays balanced.
2. Turn on your Remote controller, you will hear the remote beep.
(If the batteries of remote are low, your remote will keep on beeping and
the power indicator light will flash. Replace the batteries for your
remote.)
3. Push the throttle joystick up and then down. The lights on the drone will
turn on indicating the remote and the drone are now paired. You are
now ready to fly.
• If you are not going to use your Quadrone for an extended period of
time, please take out the batteries in your remote controller. Potential
battery leakage could occur and possibly damage the remote or create
a fire hazard.
• Before flying your Quadrone, it is highly recommended that you
familiarize yourself completely with its controls. Read through the
instruction manual completely before attempting your first flight.

Syncing the Quad and Remote

Flight Controls
Power Button
6