Table of Contents
Advertisement
EchoLife HG556 Home Gateway
User Guide
For details about how to set the parameters, see the description of the PPP dialing
software.
Step 5
Ensure that you have entered the correct user name and user password that are required
by the PP
P dialing software.
The user name and the user password are provided by your network service provider.
Che
ck whether you can use the PPP dialing software to dial successfully (t
Step 6
configured as Bridge mode).
If you cannot use the PPP dialing software to dial successfully, p
follows:
1. Stop the PPP dialing software and then power off the terminal. After five minu
power on the terminal and use the PPP dialing software to dial again.
2. Resto
re the default settings of the terminal.
If the problem persists, contact your ne
Step 7
Check whether the proxy server of the Web browser is correctly conf
Internet Explorer installed on a computer that runs Windows XP as an example. To
check whether the proxy server of the Web browser is correctly configured, do as
follows:
1.
Start the Internet Explorer.
2. Choose Tools > Internet Options.
3. In the Internet Options dialog box, click the Connections tab.
4. In the Local Area Network (LAN) settings group box, click LAN settings.
5. In the Proxy server group box of the Local Area Network (LAN) Settings dialog
box, ensure that Use a proxy server for your LAN (These settings will no
to dial-up or VPN connections) is not selected.
Try to access multiple other Web sites to check whether the terminal ca
Step 8
If the terminal still cannot access other Web sites, contact your network service provider.
8.3 W
hat can I do if the terminal cannot access the
Internet through a wire
Ensure that the power cables and telephone lines of the terminal are properly connected.
Step 1
Step 2
Check whether the WIFI indicator of the terminal is on.
If the WIFI indicator is off, you can infer that the wireless local area network (WLAN)
function of the terminal is disabled. In this case, enable the WLA
For details about how to enable the WLAN function, see the manual of the terminal.
See the des
Step 3
check whether the wireless network adapter supports the
If the wireless network adapter does not support the 802.11b an
replace it with the network adapter that supports the protocols.
less network adapter?
cription of the wireless network adapter that is installed on the computer and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
twork service provider.
802.11b and 802.11g protocols.
FAQs
he terminal is
erform further checks as
igured. Take the
t apply
n access.
N function.
d 802.11g protocols,
tes,
8-3
Advertisement
Table of Contents
