User Security Information - SAMCOM FPBN10A User Manual

Troubleshooting Guide
Problems Solutions
Battery may have been exhausted. Please
update or recharging the battery.
No Power
Battery may not be installed correctly. Please
remove the battery and reload it.
Battery's lifetime is due. Please update the
Battery lasts no battery.
long after charging Battery is not charged fully, so please ensure
that the battery indicator is green when
removing it.
Make sure you are using the same frequency
and "sub-audio frequency/sub-audio digital
It can not reach
settings" as other members of the group.
others of a group
Confirm whether you are in the valid range of
transceiver since other members of the group
may be too far away.
There are voices Please change the sub-audio frequency/sub-
audio digital settings. At this time, be sure to
from other people
change all the walkie-talkies of the group at
rather than group
members in the the same time. (Need dealers to rechange.)
channel.
When transmitting
Confirm whether the rotary volume knob is to
voices, only a small the appropriate volume.
or even no sound Send the machine to dealers to check the
can be heard on the microphone.
other side.
Other members of the group may be too far
Consistent noises
away and can not receive the voices you
send, please get close and try again.
26

User Security Information

Handheld transceiver product safety and RF
radiation
Warning: Please read the manual carefully before
using. It contains the important safety using operation
instruction, and RF energy and control information
contributing to meet the RF radiation limitation
requirement of national and international standards.
Information provided in this manual may replace the general safety
information of the editions before.
3