All Reset - SoftBank Simply User Manual

All Reset

Erase all data that you registered in handset and
reset contents of each function to default.
⹅ Resetting Handset to
Default
1
In Standby, → "Settings" → "Security"
d
2
"All Reset" → "Reset phone"
• To erase data in SD Card, check "Erase SD
card as well" ( ).
3
Enter Handset Code →
everything"
Handset is all reset.
• The power turns on again after turning off
automatically.
CAUTION
• Reset handset when battery is fully charged.
• Handset code is reset to default.
• Performing all reset erases contents and history that
you registered. Note that erased data cannot be
restored.
1
2
3
→ "Erase
d
Encrypt Phone
Encrypt data in handset.
In Standby, → "Settings" → "Security"
d
"Encrypt Phone" → "Encrypt phone" →
Enter PIN/password
"Encrypt phone"
Data in handset is encrypted.
CAUTION
• When "None" or "Long Press Center Key" is set to can-
cel Screen Lock, PIN/Password entry is not required.
• Encrypt handset with battery both fully charged and
being charged.
• Note that all data in handset is deleted if encrypting
handset is suspended.
10
10-13