Test + Copy; Copy + Compare; Verify; Select Burn Speed - Primera CD/DVD Duplication System DUP-07 User Manual

4.

TEST + COPY

This menu will guide you to perform the simulation of
copying process and if everything has passed during the
simulation, a real copying process will be performed. If
there's an error encountered during the simulation, an error
message will be displayed and the copying process will not be
initiated.
5.

COPY + COMPARE

This menu will guide you to make copies for you and after the
copy process has been finished, it will perform an additional
comparison process automatically to ensure data correctness.
6.

VERIFY

This menu will guide you to perform Disc Readalibility
Check. This operation will check the readiblity of your mater
discs and the copied discs. The purpose to perform this verify
operation is to ensure all of your copies are readable.
7.

SELECT BURN SPEED

This menu will guide you to adjust the duplication speed on
various duplication modes. For more information, please refer
to "Tutorial Guide III –Select the Duplication Speed"
8.

SELECT SOURCE

This menu will guide you to set the Master Reading Source.
For more information, please refer to "Tutorial IV – Select
the Master Reading Source"
- 65 -