Primera CD/DVD Duplication System DUP-07 User Manual page 64

Advantage:
-
-
-
Disadvantage:
-
-
In comparing this duplication mode with the traditional
"Duplication from Hard Drive" process, it offers the user more
simplicity. By selecting the "Load and Copy" mode via one simple
touch, all the necessary tasks will be automated for you. However,
in bypassing the standard "Duplication from Hard Drive" process,
you cannot use the Partition naming feature and the image will
only remain until it's overridden by using load and copy from
another master disc.
By default, the duplication mode is set to "Auto". This will
prompt you to choose between one of the duplication
modes when you enter any of the following functions:
"Copy", "Test", "Test + Copy", and "Copy + Compare".
However, if you prefer not to be prompted each time, you
can always go to "12. Setup" and select menu 14 and
manually reset it. To do so, please follow the below steps:
When you turn on the duplicator, you shall see following:
DUPLICATOR
1. Copy
Faster duplication in a long run.
(Un-Restricted DVD Duplication speed supported
by the duplication blank media)
Stable duplication.
Reliable duplication
The loading time may have an impact on overall
duplication time for small duplication jobs.
The master disc will be loaded to the reserve
partition in the Hard Drive temporarily until a new
master is loaded and overrides the previous image.
5.00
- 61 -