Tools Needed For Software Update - Permobil ConnectMe F3 Installation Instruction

Tools needed for software update

• Permobil Updater in order to get the latest software and tools with manuals
• ICS programming cable
• RNET dongle
How to perform an update:
1. Make sure Permobil updater is updated.
2. Program the ICS with the latest software using WheelchairBuilderX (X is 4 or later).
3. Program the chassie number of the wheelchair into the ICS using WheelchairBuilderX (X is 4 or later)
4. Make sure the ICS serial number is programmed.
5. Program the URIB with the latest software using the UribUpgradeTool.
6. After software update check ConnectMe LED behavior again according to "Nominal ConnectMe LED
behavior" on page 24.
ConnectMe
25