Salamander Designs SYNERGY SYSTEM SNC20 Assembly Manual page 3

4
Placing Shelves
If assembling model SNC20, skip to step C.
A
.
Adjustable Shelves
Place shelves from the bottom up. Angle
the shelf in between the front post and
set on top of shelf pegs.
A
B
.
Fine Tuning
Use the bubble level to precisely adjust
the adjustable shelves. Be sure to level
both sides as well as front to back. Use
the hex key to tighten each peg.
E
D
C
C
.
Heavy Duty Bracket
Install heavy duty brackets down outer posts
to support the double/triple- width shelf.
Place rubber shelf tabs through bracket.
D.
Rubber Pad
Place rubber pads on top of center posts.
5
Top Assembly
A
.
Secure Top
Secure top with the connector bolts.
Place the plastic plugs in the front center holes.
E.
Double-Width Shelf
Place double-width shelf on brackets.
Doc No. 500-980/v10.06 SNC - 3/4