Using The Quick Charger - Sony UCH12 Quick Start Manual

Using the Quick Charger

Charging
To charge your device using the Quick Charger
1
Plug the micro USB connector into the micro USB port of your device.
2
Plug the larger USB connector at the other end of the cable into the charger.
3
Plug the charger into a power outlet. Your device battery then starts to charge.
4
When your device is fully charged, unplug the charger from the power outlet
and disconnect the cable from your device by pulling it straight outwards.
Make sure not to bend the connector.
If no power outlet is available, you can also use the USB cable to charge your device from a
computer. Simply plug the larger USB connector into a computer USB port instead of the
charger. Note that this method will charge your device battery more slowly than when using
outlet power.
This is an internet version of this publication. © Print only for private use.
4