Page 1
CBV3843Z4S DOCSIS 3.0 EMTA/Router with Wireless-AC Revision 1.0 July 2015...
Page 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 3
CBV3843Z4S Cable Modem User’s Manual Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.
Page 4
CBV3843Z4S Cable Modem User’s Manual Canada-Industry Canada (IC) Operation is subject to the following two conditions: this device may not cause interference and this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE:...
CBV3843Z4S -to-Phone, Phone-to- CBV3843Z4S And with the integration of 4 ports switch and IEEE 802.11n wireless functionality, the CBV3843Z4S could also be used as a Wireless Cable Modem Residential Gateway in your home or small office. The ability to route data information into your broadband network could help you easily extend your local network via wire or wireless.
CBV3843Z4S Cable Modem User’s Manual 1 x Quick Installation Guide 1 x RJ-45 CAT 5 Cable 1 x 12V/2.5A Power Supply Adaptor 1 x 6P4C Telephone Cord If any of above items lost or damaged, please contact your retailer or ISP for assistance.
CBV3843Z4S Cable Modem User’s Manual Hardware Overview Front Panel and LEDs There are ten Light-Emitting-Diodes (LEDs) located on the front panel top provide status information to the user. NAME COLOR MODE STATUS DC Power is connected Green No DC Power connected...
Page 10
CBV3843Z4S Cable Modem User’s Manual No ETH device connected WiFi enable WiFi disable Blinking Data in traffic Blinking WPS in paring WPS enabled WLAN WPS disabled 2.4GHz & Green TEL1 on-hook TEL1 disable blinking TEL1 provisioning or off-hook TEL2 on-hook...
Page 11
CBV3843Z4S Cable Modem User’s Manual Step2: Connect the cable modem to an GbE Ethernet 10/100/1000 Mbps Network using a RJ-45 male-terminated Ethernet cable. This cable modem equips with two Ethernet ports, you can connect two PCs to the cable modem at the same time if necessary.
CBV3843Z4S Cable Modem User’s Manual Ethernet Installation The LAN port you are using is auto-negotiating 10/100/1000Mbps (Switch) Ethernet Interface. You can use the Ethernet port to connect to the Internet with an Ethernet network device such as NIC/Hub/Switch through RJ45.
You may get an error message. This is normal. Continue on to the next step. Type the default IP address of the CBV3843Z4S (e.g. 192.168.0.1) and press Enter. The Log In page appears. Type the user name (admin) and your password (password) in the respective fields.
The Basic page contains the basic features of CBV3843Z4S including Setup, DHCP and Backup 4.3.1 DHCP The DHCP page allows you to activate/deactivate the DHCP server function of the CBV3843Z4S , and, if the DHCP server is activated, to see DHCP leases it has provided.
Starting Local Address field, to your PCs. A DHCP server leases an IP address with an expiration time. To set the maximum number of PCs to which the CBV3843Z4S will issue IP addresses, enter it in the Number of CPEs box and then click Apply. (CPE is another term sometimes used for PC.)
WAN Blocking: To prevent others on the WAN side from being able to ping your CBV3843Z4S . With WAN Blocking on, your CBV3843Z4S will not respond to pings it receives, effectively “hiding” your gateway. Ipsec PassThrough: To enable IpSec type packets to pass through between WAN and LAN.
These PCs can still communicate with each other on your LAN, but packets they originate to WAN addresses are blocked by the CBV3843Z4S . To enable IP Filtering feature of CBV3843Z4S , check the Enable box and click Apply button.
4.4.5 Forwarding For communications between LAN and WAN, the CBV3843Z4S normally only allows you to originate an IP connection with a PC on the WAN; it will ignore attempts of the WAN PC to originate a connection onto your PC. This protects you from malicious attacks from outsiders.
CBV3843Z4S Cable Modem User’s Manual Using the Port Forwarding page, you can provide local services (web servers, FTP servers, mail servers, etc) for people on the Internet or play Internet games. A table of commonly used port numbers is also provided.
PCs from the WAN side for all ports. For example, if you locate a HTTP server on this machine, anyone will be able to access that HTTP server by using your CBV3843Z4S ’s IP address as the destination. This may be used when problem applications do not work with port triggers.
CBV3843Z4S Cable Modem User’s Manual Firewall The CBV3843Z4S provides built-in firewall functions, enabling you to protect the system against denial of service (DoS) attacks and other unwelcome or malicious accesses to your LAN. 4.5.1 Local Log The Local Log page allows you to configure the firewall event log reported via email alert, and these attack records are also visible in the table on the bottom of this page.
CBV3843Z4S Cable Modem User’s Manual Parental Control 4.6.1 User Setup This page allows configuration of users. “White List Only” feature limits the user to visit only the sites, specified in the Allowed Domain List of his/her content rule. 4.6.2 Basic Setup This page allows basic selections of rules which block certain Internet content and certain Web sites.
CBV3843Z4S Cable Modem User’s Manual 4.6.4 Event Log This page displays Parental Control event log reporting. Wireless 4.7.1 Radio The Wireless Connection Stage Configuration of the Wireless Radio includes current country and channel number. 4.7.2 802.11 Primary Network The 802.11 Primary Network allows configuration of the Primary Wireless...
CBV3843Z4S Cable Modem User’s Manual 4.7.3 Access Control This page allows configuration of the Access Control to the AP as well as on the connected clients. 4.7.4 Advanced This page allows configuration of data rates and WiFi thresholds.
CBV3843Z4S Cable Modem User’s Manual 4.7.5 Bridging This page allows configuration of WDS features. 4.7.6 WMM This page allows configuration of the Wi-Fi Multimedia QoS.
CBV3843Z4S Cable Modem User’s Manual Section MTA has 5 sub-items, which indicate the status of MTA. These information can help you to understand the parameters of MTA operation. 4.8.1 Status This page displays initialization status of the MTA.
Need help?
Do you have a question about the CBV3843Z4S and is the answer not in the manual?
Questions and answers