LG LRY-517 Owner's Manual page 41

Recording
Basic Recording from a TV
Basic Recording from a TV
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc or tape is full or you stop the recording.
1 Switch on the VCR/DVD Recorder, select the
device (VCR or DVD) for Recording and load a
recordable disc or tape. Also make sure that the
TV input is set to this recorder.
If you load a completely blank DVD±RW disc,
Disc initialize menu will appear, to select a
desired Recording Mode to initialize the disc (See
page 26).
2 Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP (High quality), SP (Standard quality), LP
(Low quality), EP (Extend quality).
VCR: SP (Standard Play), SLP (Super Long Play).
3 Select the TV channel to record.
4 Use AUDIO to select the audio channel to record.
The table below shows what will be recorded on
the different settings for different types of broad-
cast. The last column (Monitor Audio) shows what
you'll hear as it is recording.
If you set the audio channel to SAP, but there is
no SAP channel being broadcast, the main audio
(mono or stereo) will be recorded.
TV Broadcast Selected
Audio
MONO MONO
STEREO STEREO
Left
Right
MONO
MONO+SAP MONO
SAP
STEREO STEREO
+SAP SAP
MONO
5 Press z REC once to start recording.
The REC indicator lights in the display window.
6 Press STOP (x) to stop recording.
Notes
• The maximum number of DVD titles is
99 (DVD-R/RW) or 49 (DVD+R/RW).
• If the VCR/DVD Recorder is powered off during DVD
recording, the recording will not be saved.
41
Instant T
Instant T
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
1 Follow steps 1-4 as shown left (Basic Recording
2 Press z REC repeatedly to select the recording
Checking the Recording Time
Press z REC or DISPLAY once to check the record-
ing time. The recalled setting will automatically return
to the TV screen for a moment.
Broadcast Audio Monitor
Also, remaining time of recording is shown in the dis-
L Ch R Ch Audio
play window.
MONO MONO MONO
L R STEREO
To Extend the Recording Time
L L Left
R R Right
The recording time can be extended anytime by
MONO MONO MONO
pressing z REC.
MONO MONO MONO
Each subsequent press increases the recording time
SAP SAP SAP
by 10 minutes (DVD) or 30 minutes (VCR).
L R STEREO
SAP SAP SAP
To Pause the Recording
MONO MONO MONO
1 Press PAUSE/STEP (X) to pause the disc during
2 When you want to continue recording, press
Notes
•
•
imer Recording
imer Recording
from a TV).
time length. Recording starts after the first press.
DVD: Each subsequent press increases the
recording time by 10 minutes (maximum
360 minutes).
VCR: Each subsequent press increases the
recording time by 30 minutes (maximum
540 minutes). Please confirm the VHS tape
has enough remaining time to be recorded
before recording.
Input: Ch. 6
2H 01M Free
MONO SP
Input: Ch. 6
MONO
0:17:32
SP
Instant Timer Record Menu
recording.
PAUSE/STEP (X) or z REC.
If you press PAUSE/STEP (X) during the Instant Timer
Recording, it will be canceled.
The VCR/DVD Recorder will automatically power off
when the Instant Timer Recording ends.
DVD
00:09:05
30min Rec.
VCR
120min Rec