About The Symbol Display; Symbol Used In This Manual; Notes On Discs; Moisture Condensation - LG LRY-517 Owner's Manual

Introduction
To ensure proper use of this product, please read this
owner's manual carefully and retain for future refer-
ence.

Symbol Used in this Manual

The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of electric shock.
The exclamation point alerts you to the
presence of important operating and mainte-
nance / servicing instructions.
Indicates hazards likely to cause harm to
the unit itself or other material damage.
Note:
Indicates special notes and operating fea-
tures.
Tip:
Indicates tips and hints for making the task
easier.
A section whose title has one of the following sym-
bols are applicable only to those discs represented
by the symbol.
DVD-RW with Video recording mode
-RW
VR
DVD-RW with VR recording mode
-RW
Video
DVD-RAM disc
RAM
DVD+RW disc
+RW
DVD-R disc
-R
+R DVD+R disc
DVD DVD-Video disc
VCD Video CDs
ACD Audio CDs
DivX DivX files
MP3 MP3 files
WMA WMA files
JPEG JPEG files
6
About the Symbol Display
" " may appear on your TV display during opera-
tion and indicates that the function is not permitted by
this unit or the disc.

Notes on Discs

Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.

Moisture Condensation

Never operate this product
ing it from a cold location to a warm location. Leave
it for two or three hours without operating it. If you
use this product in such a situation, it may damage
discs/tapes and internal parts.
immediately after mov-