LG LRY-517 Owner's Manual page 16

Connecting an
Connecting an
or Cable TV
or Cable TV
a Antenna a
:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your VCR/DVD Recorder. If your antenna
cable is flat connect it to a 300-ohm to 75-ohm anten-
na adaptor (not supplied) and slip the adaptor over
the ANT.IN jack. Don't attempt to screw it into to the
VCR/DVD Recorder.
b b Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the VCR/DVD
Recorder. If a converter is required connect a coaxial
cable from the wall jack to the IN connector on the
converter, and a coaxial cable from the OUT connec-
tor on the converter to the ANT IN on your VCR/DVD
Recorder. This cable hookup permits both TV and
VCR/DVD Recorder operation.
a
Antenna
Rear of VCR/DVD Recorder
b
16
Antenna
Antenna
Antenna
OR OR
To view or record a CATV channel
1 Tune the TV to the VCR/DVD Recorder output
channel (CH 3 or 4).
2 Set the VCR/DVD Recorder channel selector to
the cable output channel. (Example: CH3)
3 Select a channel using the cable converter.
Notes:
With this connection, you cannot record one program
•
while viewing another.
If you are using a cable box to tune channels, it is not
•
necessary to do Auto Channel Set.
Basic TV Connections
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Rear of TV
ANTENNA
VIDEO
INPUT INPUT
V
R
Rear of VCR/DVD Recorder
S
S-VIDEO
INPUT
Rear of TV
AUDIO INPUT
R
L
A1
C A2
Pr Pb Y
R L
COMPONENT/PROGRESSIVE SCAN
AUDIO INPUT
VIDEO INPUT