Recording From External Components - LG LRY-517 Owner's Manual

Dubbing from VCR to DVD
Dubbing from VCR to DVD
You can copy the contents of a VHS tape to a
DVD±R or DVD±RW using the DUBBING (DUB) but-
ton. This allows you to archive your old VHS tapes to
DVD.
1 Insert a blank DVD±R or DVD±RW disc in the
DVD deck and close the disc tray. When using a
DVD±RW disc, you must initialize before copying;
see page 26.
2 Insert the VHS video tape you wish to copy into
the VCR deck.
3 Find the place on the VHS tape from which you
want to start dubbing using the PLAY, FF, REW
and PAUSE functions. For best results, pause
playback at the point from which you want to
record.
4 Press the DUBBING button on the Remote
Control or DUB on the front panel.
The Dubbing menu appears.
Dubbing
Free Space
Rec. Mode
Dubbing
6 Use v / V / b / B to select the desired Record
Mode: EP, LP, SP or XP.
7 Select "Dubbing" then press ENTER or DUBBING
to start copying.
8 To stop dubbing at any other time,
press STOP (x).
Dubbing will stop automatically when the VHS
tape ends.
Note:
If the VHS video tape you are attempting to copy is
copy protected, you will not be able to copy the tape.
It is not permitted to copy Macrovision encoded
tapes.
Tip:
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
"DUB" indicator blinks on the front panel display.
While in Pause mode, you can adjust the VCR play-
back position using PLAY, REW, FF, PAUSE/STEP,
etc. The DVD deck will remain in Pause mode. To
resume Dubbing, press the DUBBING button twice.
Recording from External
Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the
VCR/DVD Recorder's external inputs.
1 Make sure that the component you want to record
2 Press INPUT repeatedly to select the external
3 Load a recordable disc or tape.
4 Set a recording mode as necessary by pressing
01H54M
5 Press z REC once to start recording.
SP
Stop
6 Press STOP (x) to stop recording.
Notes
•
•
•
•
from is connected properly to the VCR/DVD
Recorder. See page 19.
input to record from.
• AV1: Audio/Video Input mounted on back
panel.
• AV2: Audio/Video Input mounted on front
panel.
• DV: DV Input mounted on front panel.
REC MODE repeatedly.
DVD: XP, SP, LP or EP.
VCR: SP or SLP
The REC indicator lights in the display window.
Check that the Audio In settings DV Record Audio
are as you want them. See page 23.
If your source is copy-protected using
CopyGuard, you will not be able to record it using
this recorder. See Copyright on page 10 for more
details.
Recording continues until you press STOP (x) or
the disc is full.
To record for a fixed length of time, see Instant
Timer Recording on page 44.
44