Samsung MIM-D01AN User Manual page 71

5 Click [Remove disappeared] to remove all disappeared devices which were found
after tracking.
6 Change zone properties.
You can select "General", "AHU", and "Group".
Mode Property name
General
Individual
Group
initialization
mode
AHU
General
Group
Group
initialization
mode
AHU
7 Click [Apply].
Edited zone structure will be applied.
8 To cancel the setting, click [Cancel].
Description
Virtual group which is managed by
installation address, not by RMC
address
The user can create and delete zone.
Not applicable.
( Only supported in group initialization
mode.)
Virtual group which manages AHU kit
in general zone.
The user can create and delete.
Virtual group which is set and
managed by the user.
The user can create and delete.
Virtual group which is managed by
installation address, not by RMC
address.
The user cannot create and delete.
DMS2.5 creates it automatically.
Virtual group which manages AHU kit
in general zone.
The user can create and delete.
Remarks
-
Not applicable.
( Only supported in group initialization
mode.)
It will be displayed as single device in
the control and monitoring screen, and
it can be controlled as single device.
You cannot move subordinate device
to the other zone.
-
It is displayed like as one device in the
control and monitoring screen and can
be controlled.
You cannot move subordinate device
to the other zone.
It is displayed like as one device in the
control and monitoring screen and can
be controlled.
You cannot move subordinate device
to the other zone.
71
E-