Samsung MIM-D01AN User Manual page 105

22
To add output, click [Add].
After adding the output, you must tick the check box.
If you want to delete output which you don't use anymore, select it and then click
[Delete].
23
Click [Save].
Set control logic will be saved in DMS2.5.
If you do not click [Save], changed setting will not be saved.
Note Control logic input items consist of factor, comparison operator, standard value
and duration time.
You can enter up to 3 input items of control logic, and the items can be connected
with compound factor.
Output item of control logic consists of factor and command value.
You can enter up to 20 output items of control logic.
You can create up to 256 control logics.
105
E-