Page 2
PARTS Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by two people is recommended. A1 (5) A2 (5) B (5) Left Arm Right Arm Back C (5) D (5) E (5) Seat...
Page 3
ASSEMBLY INSTRUCTIONS Attach two arms (A1) and (A2) to a seat (C) by inserting the 4 ends of the front and rear crossbars of the seat (C) into the holes of the arms (A1&A2) per drawing. See Fig.1. Attach the two ends of the leg connector (D) to the arms (A1 &A2).
Page 4
Tighten all bolts by using the Allen wrench (Ff) and cover with bolt caps (Fh) where necessary. Put the cushion (E) onto the chair frame and fasten the Velcros straps. See Fig. 7. Repeat procedure for the remaining four chairs. Fig.7.