Connect Power - Philips AJB3000 User Manual

Connect power

Caution
•
Risk of product damage! Make sure that
the power supply voltage corresponds
to the voltage printed on the back or the
underside of the product.
•
Risk of electric shock! When you unplug the
AC adapter, always pull the plug from the
socket. Never pull the cord.
•
Use only the AC adapter specified by the
manufacturer or sold with this unit.
Note
•
The type plate is located on the back of the
unit.
5.5
1
Connect one end of the AC adapter
to the DC input socket on the main
unit.
2
Connect the other end of the AC
adapter to the wall outlet.
EN
5
Battery power
For first-time use:
Remove the protective tab to activate
the unit battery.
1
Loosen the screw on the battery
compartment cover with a
screwdriver.
2
Remove the protective tab.
Caution
•
Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
•
Danger of explosion if battery is incorrectly
replaced. Replace only with the same
equivalent type.
•
Remove batteries if they are exhausted or if
the unit is not to be used for a long time.
Note
•
Batteries contain chemical substances, so
they should be disposed of properly.
1
Loosen the screw on the battery
compartment cover with a
screwdriver.
CR2025/3V