Program radio stations
manually
Note
•
You can store up to 20 FM radio stations.
Automatically
Press and hold
or more to activate automatic program
mode.
»
(scanning)is displayed.
» All available stations are
programmed.
» The first programmed radio station is
broadcast automatically.
Manually
1
Tune to a radio station.
2
Press and hold
1 second or more to activate
program mode.
» The preset number will appear.
3
Repeatedly press
allocate a number to this radio
station.
4
Press
station.
5
Repeat the above steps 1 to 4 for
each station you want to store in
memory with a preset number.
Note
•
If the unit is unplugged or if a power failure
occurs, the preset stations will not be
erased.
EN
9
for 1 second
for
to
again to store the
Use the menu
When you listen to radio, you can
access the menu for control options.
1
Press and hold
1 second or more.
» [
displayed.
2
Press
a menu option, and then press
to confirm the option or
enter the lower-level menu.
»
Search and store radio stations
automatically:
»
stations only) for radio
stations with strong signal
only,
»
all radio stations.
»
(system)
»
and date information:
time synchronization),
and
date format).
»
for resetting all radio settings
to the factory default status.
»
version) for displaying
the current version of the
firmware.
3
Press
for
] (scan setting) is
to select
(scan setting)
(strong
(all stations) for
(time) for setting time
(set time/date),
(automatic
(set 12/24 hour)
(set
(factory reset)
(software
to exit the menu.