Table of Contents
Advertisement
Installation Guide
The procedure for installing the management program depends on the operating system installed
on your PC. The following section takes Windows XP as an example.
Installing the E510
1.
Connect the E510 and the PC with the USB cable.
2.
The OS automatically detects and recognizes new hardware and starts the installation wizard.
If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then
double-click AutoRun.exe to run the program.
3.
Follow the prompts of the installation wizard.
4.
When the main management program is installed, the system automatically runs the TV Player
setup.
5.
Follow the prompts to install the TV Player.
Note: Click Cancel to stop the installation of the TV Player, and the main management responds
normally. Then, you can click the TV icon on the interface of the management program to
install it.
Launching the Management Program
After the E510 is installed, the management program is launched automatically. Then every time the
E510 is connected to the PC, the management program is launched automatically.
You can also double-click the shortcut icon on the desktop to launch the management program.
To enjoy the TV service, you can click the TV icon on the interface of the management program to
open the TV Player.
7
Advertisement
Table of Contents
