Download Print this page

Preparing The Eg162; Installation Guide - Huawei EG162 Manual

Advertisement

Operating system: Windows XP, Windows
2000 or Window Vista
Screen resolution: 1024 × 768 is
recommended.
Note:
Improper configurations may degrade the
wireless device performance. Make sure that
the computer configurations meet the
requirements.
For Windows XP, it is recommended to
install patches such as Service Pack 2 or
above.
For Windows 2000, it is recommended to
install patches such as Service Pack 4 or
above.

Preparing the EG162

1.
Press the right and left side of the cover,
and Remove it, take out the SIM card
slot.
2.
Insert the SIM card into the card slot,
with the contact area on the card is facing
down and the beveled corner on the card
is facing inwards. Make sure that the
SIM card is fully in place.
Insert the card slot with the SIM card
3.
into the EG162.

Installation Guide

The procedure for installing the management
program is subject to the operating system
installed on your laptop. The following section
takes Windows XP as an example.
Installing the EG162
1.
Connect the EG162 to the USB interface
of the computer..
2

Advertisement

loading