Huawei E589 User Manual

Huawei E589 User Manual

Wi-fi modem
Hide thumbs Also See for E589:

Advertisement

User Guide
E589 Wi-Fi® Modem

Advertisement

Table of Contents
loading

Summary of Contents for Huawei E589

  • Page 1 User Guide E589 Wi-Fi® Modem...
  • Page 2 This guide brie y describes the functions of the Mobile Wi-Fi. For more details, see help on the web management page. Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE...
  • Page 3 Getting to Know HUAWEI Mobile Wi-Fi Connection Scenario A Wi-Fi device can be connected to the Internet through the Mobile Wi-Fi. The actual connection procedure depends on the operating system of the Wi-Fi device. The connection scenario illustrated here is for your reference.
  • Page 4 Appearance Item Screen WPS button Press it twice in one second to view the SSID and wireless network key sequentially. Press and hold it until a WPS activation animation is displayed to enable the WPS function. Power/Wi-Fi button SIM card slot Strap hole USB port Reset button...
  • Page 5 Screen Item Signal strength Network Wi-Fi enabled Number of devices connected Internet connection status New messages Number of new messages 00:00 Battery level International roaming state Tra c data Connection duration A: Auto mode M: Manual mode...
  • Page 6 Note: Wi-Fi: Wireless Fidelity WPS: Wi-Fi Protected Setup Tra c statistics are for your reference only. To obtain the actual tra c data, contact your service provider. SSID and Wireless Network Key To connect a Wi-Fi device to your Mobile WiFi, an SSID and a wireless network key are required.
  • Page 7: Before You Start

    Before You Start Installing the SIM Card Caution: Do not use any SIM card that is not standard or is incompatible with the Mobile Wi-Fi. Otherwise, the Mobile Wi-Fi may be damaged. Insert the SIM card in the card slot. Be sure that the SIM card is facing in the right direction, as shown in the following gure, and then slide the SIM card into the slot.
  • Page 8 Installing the microSD Card Insert the microSD card into the Mobile Wi-Fi, as shown in the following gure. Note: The microSD card is an optional accessory. If a microSD card did not come with your Mobile Wi-Fi, you may purchase one yourself. To remove the microSD or SIM card, press in the card gently.
  • Page 9 Charging the Battery Charge your Mobile WiFi the rst time you use it or if it has not been used for a long time. Method 1: Using the charge Caution: Only use chargers compatible with the Mobile WiFi and provided by a designated manufacturer.
  • Page 10 Method 2: Connecting to a PC for charging Connect the Mobile Wi-Fi to a PC using a compatible data cable.
  • Page 11 Accessing the Internet via Wi-Fi Connection Step1: Power on the Mobile WiFi Press and hold until the screen lights up. The Mobile WiFi is powered on. Note: Press and hold to power o the Mobile WiFi.
  • Page 12 Step2: Establish a Wi-Fi Connection (Take a computer with Windows XP operating system as an example) Make sure that the Wi-Fi is enabled. Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: To set up a Wi-Fi connection, the PC must have a wireless network adapter installed. If Wireless Network Connection is displayed, a wireless network adapter is available.
  • Page 13 Step3: Access the Internet After you establish a Wi-Fi connection successfully, you can access the Internet using the following modes. Mode Operations After the Mobile Wi-Fi is powered on, it will connect to the Internet Auto automatically. If there is no data transmission over a period of time, the Mobile Wi-Fi automatically terminates the Internet connection.
  • Page 14 Note: Launch the web management page to select the mode for accessing the Internet. You can choose whether to enable the Mobile Wi-Fi to connect to the Internet automatically even while you are roaming. If this function is disabled, the Mobile Wi-Fi automatically disconnects from the Internet while you are roaming.
  • Page 15 Daily Use Power Saving Mode If no operation is performed on the Mobile Wi-Fi within a preset period, the screen turns o . Press any key to light up the screen. If the Mobile Wi-Fi is powered by the battery only, choose whether to enable the Mobile WiFi to turn o Wi-Fi automatically.
  • Page 16 Establishing a WPS Connection If a Wi-Fi client connected to the Mobile Wi-Fi supports the WPS function, a wireless network key will be automatically generated without manual input. To establish a WPS connection, perform the following steps: Power on the Mobile Wi-Fi. Start the client.
  • Page 17 Restoring Factory Defaults If you forget the changes you have made to some parameters, you may restore factory default settings and recon gure the Mobile Wi-Fi. To restore to factory default, press and hold the R E S E T button until the screen turns o .
  • Page 18 Example: Wi-Fi Connection to a Smart Phone (iPhone) Select Settings > Wi-Fi, and then turn on Wi-Fi. Automatically detect the networks in range and display the access point list. Select a network indicated by the SSID of the Mobile Wi-Fi. If necessary, enter a password and tap Join.
  • Page 19 Tips If the Mobile Wi-Fi is placed in an environment with poor ventilation, it may overheat after extended use. When the Mobile Wi-Fi overheats, it will switch o and disconnect from the network automatically to protect itself. If this happens, place the Mobile WiFi in a well-ventilated location, then restart the Mobile Wi-Fi.

Table of Contents