Advertisement
INSTALLATION OF THE LASER UNIT:
The operation and efficiency of the laser detector depend on the number of sensors
used, their precise installation and proper aligning. The structure and size of the vehicle
determine the number of the required sensors.
One central unit can handle up to 4 sensors, however, bigger vehicles and the detection
of special speed cameras may require 6-8 sensors. In these cases, another central unit
must be connected to the system with extra power- and communication cables. It is
recommended to trust official workshops with the determination of the required sensors
and the installation of the device. Contact our customer service and we help you finding
the nearest workshop!
1-2. Installing the license plate frame and the sensors:
1
3
5
The sensors must be placed into the special, infrared-transmitting license plate frame
included in the set. During installation, the original frame has to be replaced with this
special frame and then the wirings of the sensors must be led to the cabin of the vehicle
and connected into the central unit (3).
9
4
8
6
7
Sensors
8
2
Advertisement
