Complete Installation - IKEA DATID Installation Instructions And Use & Care Manual

1. For non-vented (recirculating) installations only, install
charcoal filters over grille on blower housing. See the
"Range Hood Care" section.
2. Install metal filters. See the "Range Hood Care" section.
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the
hood before cooking and allow it to operate several minutes
after the cooking is complete to clear all smoke and odors from
the kitchen.
The hood controls are located on the front panel of the range
hood.
D
E
A. Halogen lamp housings
B. Grease filter handle
C. Grease filter
D. Utensil hanging rails
E. Blower and light controls

Complete Installation

RANGE HOOD USE
A
B
C
D
3. Check the operation of the range hood blower and light. See
the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
Range Hood Controls
A
A. On/Off light button
B. Blower off and speed minimum button
C. Blower speed medium button
D. Blower speed maximum button
Operating the light
The On/Off light button controls both lights. Press once for On
and again for Off.
Operating the blower
The BLOWER SPEED buttons turn the blower on and control
the blower speed and sound level for quiet operation. The
speed can be changed anytime during fan operation by
pressing the desired blower speed button.
Press the BLOWER OFF button a second time to turn the
blower off.
B C
D
11