Table of Contents
Advertisement
matter the URL string is found full or partial matched with a keyword.
-- Filter URL:
Blocks HTTP requests containing specify URL string. Example: cgi-bin
-- Filter HOST:
Blocks HTTP requests containing specify HOST string. Example:
www.xxx.com
Web Host Filter Settings:
according the Web Host name or partial matched with a keyword.
3.6.6 Port Trigger
Some applications require multiple connections, such as Internet gaming, video conferencing,
Internet telephony and others. If you need to run applications that require multiple connections,
specify the port normally associated with an application in the "Trigger Port" field, select the
protocol type as TCP or UDP, then enter the public ports associated with the trigger port to
open them for inbound traffic.
Port Trigger Setting:
After Enable the Port Trigger, it allows a host machine to dynamically
and automatically forward a specific port back to itself. Port triggering opens an incoming
port(public port) when your computer is using a specified outgoing port(trigger port) for specific
traffic.
Trigger Port:
This is the port used to trigger the application. It can be either a single port or a
range of ports.
Trigger Protocol:
This is the protocol used to trigger the special application.
Public Port Range:
This is the port number on the WAN side that will be used to access the
Web Host Filter is a web solution that blocks web-sites access
41
Advertisement
Table of Contents
