Table of Contents
Advertisement
<Add a routing rule>
Destination:
Defines the base IP address (Network Number) that will be compared with the
destination IP address (after an AND with NetMask) to see if this is the target route.
Range:
select the range from drop down list
Gateway:
Enter IP address of the next hop router that will be used to route traffic for this route.
If this route is local (defines the locally connected hosts and Type = Host) then this IP address
MUST be the IP Address of the router.
Interface:
Select the interface mode from drop down list.
Comment:
Enter the comment for this static route.
<Current Routing table in the system>
To see the detail settings of current routing information in the system.
3.5 Wireless Settings
The wireless settings can be quickly configured as a wireless access point for roaming client
by setting the access identifier and channel number. It also supports data encryption and client
filtering. The Wireless Settings contains the following sections:
Basic
WPS
3.5.1 Basic
This function allows you to define SSID, and Channel for the wireless connection. These
parameters are used for the wireless stations to connect to the Access Point. Click Basic
Advanced
Station List
27
Security
WDS
Site Survey
Advertisement
Table of Contents
