Table of Contents
Advertisement
If the communication link between your computer and router is not setup correctly, after you
type ping 192.168.1.1 under DOS prompt following messages will appear:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
This failure might be caused by cable issue or something wrong in configuration procedure.
3. Configure Wireless Router via Web Based Utility
The Wireless Router implements a Web server allowing user configure this device via the web
based Utility. This Utility provides comprehensive system management scheme, including
system configuration, performance monitoring, system maintenance and administration.
3.1 Access Web Based Configuration Utility
To access the Web-Based Configuration Utility, you have to launch your Internet Browser. (MS
IE 6.0 or later, Netscape Navigator 4.7 or later).
Step1:
Enter Wireless Router's default IP address as
then press Enter.
http://192.168.1.1
19
in the Address field
Advertisement
Table of Contents
