Table of Contents
Advertisement
5-2
Hardware Setup Procedure
1.
Connect USB Cable of PC to USB port of FF1 Projector.
2.
Connect Power Cord to FF1 unit.
3.
Hold Menu and right buttons and turn on "Switch" button.
4.
When Power LED lights green and Temp LED lights red, release two buttons.
No
Step
Connect All
1
Ports
5-3 Firmware Software Installation Procedure
5-3.1 DLP Composer Lite Setup Procedure
No
Step
1
Choose the
program
Procedure
1. Connect USB Cable
of PC to Mini USB port of
FF1 Projector.
2. Connect Power Cord to
FF1 unit.
3. Hold menu and right
buttons and turn on
"Switch" button.
4. When Power LED lights
green and Temp LED
lights red, release two
buttons.
Procedure
Choose "DLP Com-
poser Lite v3.6 Setup"
program.
5-2
Photo
Mini USB Port
Photo
FF1
Advertisement
Table of Contents
