Maintenance - Nature Power 60032 Owner's Manual

When the system is connected correctly, the controller's Power Out indicator illuminates.
Note: Do not connect the battery cables directly to the solar panels.
Do not connect any power supply directly to the solar panels.
4. As the system charges, observe the indicators on the controller:
The Percent indicator light displays battery capacity (25%, 50%, 75%, and 100%). When the
battery charge is very low the indicator will not display any percentage.
The Power Out indicator illuminates when the system connections are correct and power is
being supplied to the controller and to the battery or other load.
5. When disconnecting the system, cover the solar panel to prevent arcing during disconnection,
then disconnect the solar panel first, then the battery, and the load.
The controller requires no maintenance except occasional cleaning and replacement if damaged or
worn.
First: Battery

Maintenance

Second: Panel
page 8/10
Page 8 of 11
Third: Other Load