•
Inspect the area before each use. Keep it area clean, dry, free of clutter, and well lit. Cluttered,
wet, or dark work areas can result in injury.
•
Do not use the charge controller and solar panels where there is a risk of causing a fire or an
explosion; e.g., in the presence of flammable liquids, gases, or dust. The charging system can
create sparks, which may ignite the flammable liquids, gases, or dust.
•
Do not allow children to handle the controller, solar panels, or batteries.
•
Do not wear dangling objects or jewelry when working with electrical equipment.
•
Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant
safety glasses with side shields.
•
Do not overreach. Keep proper footing and balance at all times.
•
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
•
To prevent serious injury or property damage read owner's manual before operating.
•
Ensure that the leads match positive to positive and negative to negative. Wrong connections
may cause property damage.
•
DO NOT exceed rated current of 30 amps.
•
Securely mount charge controller in a well-protected dry place free from moisture and weather.
•
Product should be placed in a well ventilated area, free from flammable gases.
•
No altercations shall be made to this product.
•
DO NOT use if product is damaged. Replace damaged parts before using.
•
DO NOT wear metallic jewelry when working on electrical equipment.
•
DO NOT drop tools or other large objects on the glass of the solar module.
•
DO NOT use soap, solvents, or similar chemicals to clean solar panel.
•
Not for use by or around children.
WORK AREA SAFETY
PERSONAL SAFETY
Specific Operation Warnings
page 6/10
Page 6 of 11