Intended Use - Nature Power 60032 Owner's Manual

This charge controller is used to regulate power from a solar panel, to a 12V battery. The controller
handles up to 30 amps and also prevents overcharging, high-voltage surges, short circuit or low
voltage discharges, and reverse current.
Rated voltage
Max input power
Current
Overcharge protection
Starting voltage
Over discharge
No load current
Operating temperature

Intended Use

Technical Specifications
Property
Discharging
Charging
Cut-off
Resume
display
Altitude
-13ºF to 131 ºF (-25℃ to 55℃)
Below 3.4 miles (5500m) [above 1.24 miles
(>2000m) causes reduced power]
page 4/10
Specification
12VDC Auto
525W
30A
30A
14.4V±1%
12.3V
10.7V±1%
12.6±1%
≤10mA
LED