Options - Takeuchi TCR50 Operator's Manual

OPTIONS

General Precautions
Precautions on Safety
¡ Consult with a Takeuchi dealer before installing optional attachments.
¡ Do not use attachments that have not been approved by Takeuchi or a Takeuchi dealer.
Doing so may compromise safety or adversely affect the machine's operation or service
life.
¡ Takeuchi will not be held responsible for any injuries, accidents or damage to products
caused by the use of a non-approved attachment.
Heed the following when removing or installing an attachment or option:
¡ Choose a flat, hard surface to perform the operations. Also make sure there is enough
light and good ventilation.
¡ Clean the area, remove any articles that may get in the way or be dangerous, and
remove any spilt oil or grease.
¡ When removing or installing the attachment, place it in a stable position so that it
does not tip over.
¡ Due to the risk of loads falling and/or hitting people, do not allow unauthorized
personnel in the work area.
¡ Use the crane to carry heavy objects (25 kg (55 lb.) or greater).
¡ When removing heavy parts, be sure to prop them up before removing them. When
lifting them with a crane, be careful to balance them properly.
¡ Operating with loads suspended with the crane is dangerous. Place loads on a
stand and check for safety.
¡ When attaching the attachments, failure to follow proper procedures could result in
serious damage. Consult with a Takeuchi dealer beforehand.
Precautions on Installing Attachments
After replacing optional attachments or other special attachments, test-run them, then inspect
the hydraulic oil level and add oil if necessary.
In addition, consult with a Takeuchi dealer for details of removal and installation procedures.
WARNING
144