Troubleshooting - Scott SLIMISSIMO 20200 Instruction Manual

F. TROUBLESHOOTING
The appliance does not work.
Possible Cause
- The appliance is not connected to the mains
supply.
No or delayed response in several trials of pressing the function keys on panel.
Possible Cause
- Appliance is under electromagnetic
interference.
- Dirt on the panel.
The coffee is not hot enough.
Possible Cause
- The cups have not been preheated.
- The brewer is too cold.
The coffee cannot come out from spout.
Possible Cause
- Empty system function might be used
before.
Quality of the first cup of coffee is poor.
Possible Cause
- The first run of grinder does not deliver
sufficient quantity ground coffee into the
brewing unit.
Coffee has no cream.
Possible Cause
- Coffee beans are not fresh.
The appliance takes long time to heat up.
Possible Cause
- Excessive scale has built up.
There is no alert when the water tank is removed or the water level in tank is low.
Possible Cause
- The area near the water tank connector is
wet.
Solution
- Plug in and press the Power ON/OFF button.
- Check the cord and the plug.
Solution
- Unplug the appliance. Restart after few
minutes.
- Clean the panel with the cloth provided.
Solution
- Warm the cups.
- Rinse the appliance at least 3 times before
making the coffee.
Solution
- Press the hot water button until water can
come out from spout.
Solution
- Make another cup of coffee, the quality will
be improved.
Solution
- Use fresh coffee beans.
Solution
- Descale the appliance.
Solution
- Wipe the water around the water tank
connector.
Page 19 of 20