Mode Selection - Scott SLIMISSIMO 20200 Instruction Manual

III. MODE SELECTION
The machine is equipped with different settings: Default Setting, ECO Mode and Speed Mode.
ECO Mode helps save energy, Speed Mode can make coffee more quickly than in default setting.
Illumination light
*
Pre-brewing
Auto shut off time
Cup volume memory
*
The pre-brewing function pre-wets the ground coffee in the brewer with a small amount of
water before extraction. This will provide better extraction performance and a coffee with
better quality.
1. When the machine is in standby condition, press
2. The will flash and the following buttons will have the following indications in
different settings :
In ECO Mode
In Speed Mode
In Default Setting
3. Press the hot water button for ECO mode, Espresso button for Speed mode and Lungo
button for Default setting. Two beep sounds will be heard which indicates that the mode is
selected. (Note: If the relative lighted button for each mode is pressed, the machine will
not respond).
4. To remain the setting unchanged, press
return to standby condition.
Default Setting
Yes
Yes
20 mins
Yes
Hot water button
Lights on
Flashing
Flashing
Speed Mode
Yes
No
29 mins
Yes
and hold for 5 seconds.
Espresso button
Flashing
Lights on
Flashing
or wait for 5 seconds for the machine to
ECO Mode
No
Yes
10 mins
Yes
Lungo button
Flashing
Flashing
Lights on
Page 14 of 20