Table of Contents
Advertisement
2.
Select "Yes" or "No", then press
/
.
CONFERENCE CALLS
You can have a conference call with an external
party and 2 internal parties.
To have a conference call:
1.
First establish the call with the external party
by either making an external call or answering
an incoming call.
2.
Press
to make an intercom call to
another handset. (The external party will be
put on hold. The internal party answers your
intercom call by pressing
3.
Then you press
seconds (you will hear a confirmation key
tone).
You, the external party and the other internal party
can talk together in a conference call.
OPERATING THE BASE UNIT
PAGING THE HANDSET
To look for your handset, press the PAGE button
in the cradle of the base unit.
To stop the paging, press any button once.
USING MULTIPLE BASE UNITS
Your handset can select 1 of 4 base units:
1.
Press
/
, then use
the track ring to select "Handset Settings".
2.
Press
/
.
3.
Use
,
or the track ring to select
"Select Base", then press
4.
Use
,
or the track ring to choose
automatic selection or base unit 1-4, then
press
/
.
NOTE: When "Automatic" is selected, the
handset will select a free base unit for you.
USING MULTIPLE HANDSETS
Your base unit can synchronize with up to 4
handsets.
INTERCOM CALLING BETWEEN HANDSETS
To call between handsets:
1.
Press
on your handset.
2.
Type in the number of the handset (1-4) that
you want to reach.
3.
The paged handset will ring. The display of
the paged handset will show "Int Call".
).
and hold for about 2
,
or
/
.
NOTE: To cancel the intercom call, press
ANSWERING INTERCOM CALLS
To answer an intercom call, press
To end an intercom call, press
the intercom call.
CALL WAITING
If an external call comes in during an intercom
conversation, you will hear a call waiting tone.
To end an intercom call:
1.
Press
. (The external line will ring).
2.
Press
again to answer the external call.
CALL TRANSFER BETWEEN HANDSETS
You can transfer an external call from one handset
to another.
To transfer a call between handsets:
1.
During an external phone conversation, press
. Your caller will be put on hold.
2.
Type in the handset number (1-4) to which
you want the call transferred.
3.
The paged handset will ring and "Int Call"
will appear on the display.
4.
To answer the call on the paged handset,
press
.
5.
Press
on the paging handset to transfer
the call.
NOTE: If the other handset does not answer,
press
to end the intercom call and get
back to the external line. Pressing
both the intercom call and the external call.
REGISTERING HANDSETS TO BASE UNIT
The handset and base unit are factory
pre-registered with each other. When you
purchase an additional handset, you have to
register it to the base unit in order to make and
answer calls.
You can register up to 4 more handsets to make
and answer calls via the same base unit.
Handsets are numbered 1 to 4.
To register a new handset:
1.
Press and hold the PAGE button on the
cradle of the base unit to enter Registration
Mode.
.
.
again to end
will end
Advertisement
Table of Contents
