Table of Contents
Advertisement
CONFERENCE CALLS
You can have a conference call with an external party and 2 internal
parties.
To have a conference call:
1. First establish the call with the external party by either making an
external call or answering an incoming call.
2. Press
to make an intercom call to another handset. (The external
party will be put on hold. The internal party answers your intercom call
by pressing
3. Then you press
confirmation key tone).
You, the external party and the other internal party can talk together in a
conference call.
OPERATING THE BASE UNIT
PAGING THE HANDSET
To look for your handset, press the
unit.
To stop the paging, press any button once.
REGISTERING HANDSETS TO BASE UNIT
The handset and base unit are factory pre-registered with each other.
When you purchase an additional handset, you have to register it to the
base unit in order to make and answer calls.
You can register up to 4 more handsets to make and answer calls via the
same base unit. Handsets are numbered 1 to 4.
To register a new handset:
1. Press and hold the
Registration Mode.
2. On the handset, press
3. Use
,
or the track ring to select "Phone Setup", then press
.
).
and hold for about 2 seconds (you will hear a
button on the cradle of the base unit to enter
.
button in the cradle of the base
18
Advertisement
Table of Contents
