Table of Contents
Advertisement
2. Slide off the battery compartment cover.
3. Disconnect the battery plug from the jack in the
compartment and remove the battery pack.
4. Insert the new battery pack and connect the
cord into the jack.
5. Put the battery compartment cover back on.
6. Place handset on the base to charge the new
battery for 15 hours.
CAUTION: To reduce the risk of fire or personal
injury, use a 3.6 V, 1200mAh battery. Contact your
place of purchase.
RECYCLING NICKEL-METAL HYDRIDE
BATTERIES
Nickel-metal hydride batteries must be disposed
of properly.
Please take your used battery pack to a store that
recycles Ni-MH batteries.
SPECIFICATIONS
Here are the specifications for your Cube Phone:
TYPE
DESCRIPTION
Standard
Worldwide Digital
Cordless
Telecommunication
(WDCT)
Frequency range
2.4GHz ISM
Channel bandwidth
0.824MHz
Modulation
GFSK
Speech coding
Adaptive Differential Pulse
Code Modulation
(ADPCM)
Communication
Up to 300 meters in open
range
space
Base power supply
Input 120V / 60Hz
Handset charger
Input 120V / 60Hz
power supply
Languages
11 languages
Handset battery
15 hours (approx.)
charging time
Operating time
Standby: 5 days (approx.)
Talk: 7 hours (approx.)
Operating
0°C to 45°C
temperature
Storage temperature
-20°C to 60°C
(outdoor)
Storage temperature
-5°C to 50°C
(indoor)
Humidity range
25% to 90%
NOTE: The technical specifications for this
product and the contents of the user guide are
subject to change without notice.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to
learn more about Oregon Scientific products such
as digital cameras; MP3 players; children's
electronic learning products and games;
projection clocks; health and fitness gear;
weather stations; and digital and conference
phones. The website also includes contact
information for our customer care department in
case you need to reach us, as well as frequently
asked questions and customer downloads.
We hope you will find all the information you need
on our website, however if you're in the US and
would like to contact the Oregon Scientific
Customer Care department directly, please visit:
www2.oregonscientific.com/service/support
OR
Call 949-608-2848.
For international enquiries, please visit:
www2.oregonscientific.com/about/international/d
efault.asp
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the conditions that
this device does not cause harmful interference.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This product meets the applicable Industry
Canada technical specifications.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the
Advertisement
Table of Contents
