Smart Sonic Receiver; Using The Pointer - Kyocera Gratina Basic Manual

Smart Sonic Receiver

The product is equipped with Smart Sonic
Receiver that transmits sound by vibrating the
display. The earpiece (receiver) does not have
any holes, however, you can use the product as
usual.
■Touching to Your Ear
Hold the receiver area up to your ear as shown
so that your ear is covered, blocking surrounding
sound and increasing audibility. Move the
product up and down, left and right to suit your
hearing and surroundings.
Earpiece (receiver)
Mouthpiece (microphone)

Using the Pointer

The product uses e/c/s/f to operate the
pointer. Activate a Pointer-capable function/
application and turn the Pointer ON to use the
on-screen pointer.
1
Activate a pointer-capable function/
application
" " (OFF)/" " (ON) is displayed in the status
bar, and " " (pointer) is displayed when the
pointer is ON.
• If the Pointer is OFF, refer to "Turn ON the
Pointer" (▶P. 56).
• If a confirmation screen is displayed, confirm
the content and select "Close this screen".
Checkmark "Don't ask again" to no longer
display the confirmation screen when next
activating the Pointer.
55