Blueant V1 User Manual page 23

BlueAnt
V1 Bluetooth Headset
1. Is my phone compatible?
If your phone has Bluetooth it more than likely supports a Handsfree or Headset Bluetooth profi le, and so will work with
the V1. Check your phones manual for up to date information.
2. What is the passcode/passkey of the V1?
The Passcode for the V1 is "0000".
3. Can I connect more than one device to my V1 at the same time?
Yes, the V1 utilises multi-point technology allowing you to connect to 2 phones at the same time and answer an incoming
call from either phone.
4. Why won't my V1 go into pairing mode?
Depending on the status you may have to wait for up to one minute to enter pairing mode.
The V1 sometimes requires a few seconds to establish a connection. Please be patient while devices are searching.
To Reset the V1, Short press all three buttons, this will delete all pairing information and enter pairing mode.
5. My V1 worked great but now it won't connect. What can I do?
As newer phones are like mini-computers, they may become corrupt over time and you may need to reset them every
so often (at least once a week is good). Simply switch off your phone remove the battery for a few seconds, replace and
reboot. The V1 should now connect. If not, remove existing pairing and re-pair the devices.
23