Blueant V1 User Manual page 13

Redial – Calls the number you last dialled
Call Back – Calls the last received number
Phone Commands – Triggers the Voice Dial function of your cell phone
Check Battery – Tells you the status of your battery charge level
Am I Connected? – Checks to see if there is a phone connected. If not it will attempt to connect to your phone.
Switch Headset Off - Turns the headset OFF
Cancel - Cancels the active operation
Settings Menu – Puts you into the Settings menu
'Say a command' Prompt - Enables or Disables the 'Say a Command" prompt. With it disabled, you will hear a beep instead.
Incoming Call Function – Disable the Incoming call ID prompt and also the Voice Answer
Turn Off Voice Control – Turns OFF the Voice Control. To enable, Hold Vol+ and Vol – for 6 seconds
Sensitivity Level – Choose from High Medium and Low. High will reject less, Low will reject more.
LED Light – Turns the LED Lights OFF
Reset the V1 – Deletes all pairing information resets the Voice Interface and reboots the headset back into pairing mode
VOICE CONTROL – Voice Answer
On an incoming call the headset will announce the Caller ID.
It will then ask you if you want to
Answer or Ignore the Call
Say "ANSWER" OR "IGNORE"
BlueAnt
13