Blueant V1 User Manual page 10

BlueAnt
VOICE CONTROL – "Say a command"
Step 1: Press the BlueAnt Button (BAB), a voice prompt asks you to "Say a command"
Step 2: "What Can I Say" or one of the available commands such as "Call Offi ce".
A voice prompt responds with "Calling Offi ce"
Step 3: The BlueAnt V1 then calls your Offi ce. (set to speed dial 3 in your phone)
VOICE CONTROL - Getting the best results
1. After the "Say A Command" prompt, speak your command clearly.
2. Make sure the microphone is not covered and is pointed towards your mouth.
3. Speak louder than any background noise.
4. Say "What Can I Say" for a reminder of the usable commands. Click the BlueAnt Button when you hear the command you want
5. You can say "cancel" or "go back" in any menu.
6. Speak at a consistent speed and pronounce each syllable clearly, do not speak too quickly.
7. Avoid using the headset in high noise situations or when others are speaking close by.
8. If the headset does not respond immediately to your command, say it again.
9. Press the BlueAnt Button to cancel at any time.
10