Chapter 3 Using The Phone; Phone Configuration; Phone Network Setup; Sample User Tag/Card/Cellophane-Protector - Retail - Motorola ES400 User Manual

3 - 18 ES400 User Guide
Tap Disconnect.
2.
NOTE Tapping
the connection. You cannot disconnect the connection until the data transfer is complete

Chapter 3 Using the Phone

Phone Configuration

This section explains how to verify ES400 service on an Global System for Mobile communications (GSM) wireless
network and establish settings.
GSM networks deliver mobile voice and data services, such as Short Message Service (SMS)/Text Messaging,
with full roaming capabilities across the world. High-speed Downlink Packet Access (HSDPA) enabled networks
offer Internet-based content and packet-based data services. This enables services such as internet browsing,
e-mail on the move, powerful visual communications, multimedia messages, and location-based services.
When using the ES400 as a phone, services can include speed dialing, call tracking, voice mail, call forwarding,
conference calling, and caller ID, depending on the type of service.
Also use the integrated phone as a modem to connect the ES400 to an ISP or work network. The GSM enabled
ES400 can connect to the Internet or work network using Cellular Line, or using the modem specified by the mobile
phone service provider.
NOTE Before using an ES400 on a wireless network, first select a provider, establish a voice and data-enabled
service plan, and configure the ES400 (where applicable). Refer to the ES400 Mobile Computer User Guide
for information on how to use the phone and services.

Phone Network Setup

Sample User tag/card/cellophane-protector - Retail

Before turning on your new ES400, if your cellular service is with AT&T, T-Mobile, Telcel, Vodaphone, or any other
operator that supplies you with a SIM card, please insert this card into the slot in the back of this device. Note that
first-time power-up may take up to 5 minutes, as the device automatically configures itself for your operator.
If you intend to use this device with an operator that requires calling-in for activation, such as Verizon or Sprint,
please power-up the device and follow on-screen instructions. It may take 10 to 15 minutes to complete the
activation the first time. Note that you'll need another phone available, for calling your wireless operator's
customer service department. Also, your phone will need to be in-coverage, i.e. in the service area, of your
wireless operator, for its activation process to complete.
Disconnect
during an active data transfer (e.g., downloading a web page) automatically reconnects
.