Using A Wired Headset; Using A Bluetooth Headset - Motorola ES400 User Manual

3 - 6 ES400 User Guide
•
Speaker Mode: Use the ES400 as if on speaker phone. Tap the Speaker On button to activate this mode.
Tap the Speaker Off button to switch back to handset mode.
•
Headset Mode: Connect a Bluetooth headset or a wired headset to automatically switch audio to the
headset.
The ES400 defaults to handset mode. When a wired headset is plugged into the ES400 headset connector or a
Bluetooth headset is configured for use with the ES400, the earpiece and speakerphone are muted and audio is
heard through the headset.
NOTE While using a Bluetooth headset during a call, the ES400 will not go into suspend mode.

Using a Wired Headset

NOTE Remove the headset jack plug before connecting the Headset Adapter to the ES400.
You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack of the Headset Adapter Cable into the headset connector on the side of the ES400.
Plug the Headset connector into the connector on the Headset Adapter Cable. Set the ES400's volume
appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
Using a Headset
Figure 3-5

Using a Bluetooth Headset

You can use a Bluetooth headset for audio communication when using an audio-enabled application. See
7, Using Bluetooth
appropriately before putting the headset on. When a Bluetooth headset is connected the speakerphone is muted.
for information on connecting a Bluetooth headset to the ES400. Set the ES400's volume
Chapter