Motorola ES400 User Manual page 102

Hide thumbs Also See for ES400:
Table of Contents

Advertisement

6 - 8
ES400 Mobile Computer User Guide
Camera capture mode
The MC35 offers two types of camera capture mode:
Camera - for taking pictures and recording videos
Bar code - for capturing a bar code data
To select a camera capture mode:
• Slide the Camera/Bar Code switch to the Camera icon or the Bar code icon to switch from one capture mode to
another.
To take a photo:
Launch the Camera application by performing one of the following:
1.
Press the Camera button located on the lower-right side of the phone, to activate the camera.
Tap > Programs > Pictures & Videos > Camera .
Open Pictures & Videos and tap Camera on the command bar.
Check the image on the view finder, adjust if necessary.
2.
Press the Camera button to take the picture.
3.
To take photos using timer:
Using the timer, you can take a self-portrait. Just place the device on a stable support and press the camera button,
then get into position.
Launch the Camera application.
1.
Tap Menu > Mode > Timer.
2.
NOTE: By default, the self timer delay is set at five seconds.
To record a video clip:
Launch the Camera application.
1.
Tap Menu > Video to set shooting mode to video.
2.
The available recording time displays on the screen.
NOTE: By default, the time limit for recording videos is set at 15 and 30 seconds.
Press the Camera button to begin recording.
1.
Recording stops when you press the Camera button again.
To select video quality:
You can specify the quality (video resolution and sound fidelity) and size of the video clips you record. Video clips
of higher quality require more memory.
On the Camera screen, tap Menu > Video.
1.
Tap Menu > Quality.
2.
Select a video quality.
3.
Tap OK.
4.

Advertisement

Table of Contents
loading

Table of Contents