Specifications - Makita HS6101 Instruction Manual

ENGLISH (Original instructions)
1-1. Lever
2-1. Front lever
3-1. Rear wing nut
4-1. Stopper
5-1. 0 ﾟ position
5-2. 45 ﾟ position
5-3. Cutting line
5-4. Screw
6-1. Switch trigger
6-2. Lock-off button
7-1. Light
8-1. Hex wrench
8-2. Loosen
8-3. Tighten
8-4. Shaft lock
9-1. Mounting shaft

SPECIFICATIONS

Max. cutting depth
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece. With
appropriate saw blades, aluminum can also be sawed.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause
voltage fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.32 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected
with a fuse or protective circuit breaker having slow
tripping characteristics.
Explanation of general view
9-2. Inner flange
9-3. Saw blade
9-4. Outer flange
9-5. Hex bolt
10-1. Mounting shaft
10-2. Inner flange
10-3. Saw blade
10-4. Outer flange
10-5. Hex bolt
11-1. Ring
11-2. Inner flange
11-3. Saw blade
11-4. Outer flange
11-5. Hex bolt
12-1. Hex wrench
13-1. Dust nozzle
Model
Blade diameter
at 0°
at 45°
at 50°
-1
)
Overall length
Net weight
Safety class
HS6100
165 mm
54.5 mm
39.5 mm
35.5 mm
297 mm
3.7 kg
ENE078-1
Noise
The typical
according to EN60745:
Model HS6100,HS6101
ENF100-1
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model HS7100,HS7101
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
4
13-2. Screw
14-1. Vacuum cleaner
14-2. Hose
16-1. Clamp lever
16-2. Rip fence (Guide rule)
17-1. Adjusting screw for 0 ﾟ
17-2. Adjusting screw for 45 ﾟ
18-1. Triangular rule
19-1. Base
19-2. Screw
19-3. Saw blade
20-1. Limit mark
21-1. Screwdriver
21-2. Brush holder cap
HS6101 HS7100
48.5 mm
43.5 mm
5,500
3.7 kg 4.0 kg
/II
A-weighted noise level
) : 89 dB (A)
pA
) : 100 dB (A)
WA
) : 90 dB (A)
pA
) : 101 dB (A)
WA
Wear ear protection
HS7101
190 mm
67 mm
310 mm
4.0 kg
ENG905-1
determined