Chuango IP116 Plus Instruction Manual page 8

Add Camera
You can enter add camera interface by tapping "+" or choosing [Add Camera] from
menu page.
1. Waiting for the IP116 Plus HD WiFi Camera to Boot Up:
Plug the power adapter into a wall socket and the camera will boot up after a few
seconds.
2. Putting the IP116 Plus HD WiFi Camera into WiFi Configuration Mode:
Using the Reset Pin, press the Reset Button on the side for 3 seconds; you will hear
a beep and see the red light start to blink once per second which indicates that the
camera is in the WiFi configuration mode.
8