Table of Contents
Advertisement
C
O
M
M
E
R
C
Adjust the
Diagram 18
rear deck.
21. Adjust the rear deck. Diagram 18. To raise the rear deck, insert the ¼-inch
hex key (H). Make sure that the key is fully engaged and turn it clockwise.
Turning the hex key counterclockwise lowers the unit.
22. Plug in the power cord. Connect the power receptacle into an appropriate
power outlet. Refer to Grounding Instructions on page 3.
CAUTION: The treadmill requires a dedicated, grounded circuit.
A 20 amp dedicated circuit is recommended. Make sure that no other
product or machine uses the same circuit as the treadmill.
TURNING THE UNIT ON AND OFF
Use the ON/OFF (I/O) power switch to turn the unit ON and OFF. This switch is
located on the front of the unit, near the power cord.
To complete the installation of the treadmill, continue with Checking the Alignment
of the Running Belt.
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
page 21
Hide quick links:
Advertisement
Table of Contents
